TR-25 CW Transceiver Kit (Retired)

$199.00
Out of stock
SKU
TR24CWTRANSCEIVERKIT

TR-25 is Retired and No Longer Available

A compact but powerful 2-band CW transceiver kit that uses no tiny pushbuttons, and without those seemingly endless and hard-to-remember back menus. There is a knob or a switch for every function!

 

TR-25 is Retired and No Longer Available

Here is a compact but powerful 2-band CW transceiver kit that uses no tiny pushbuttons, and without those seemingly endless and hard-to-remember back menus. There is a knob or a switch for every function!

DC Input Voltage Vs. Typical RF Output

DC In 20 meters 40 meters
9.5V 3.5W 4.0W
10V 4.0W 5.0W
12V 5.0W 7.0W
14V 7.0W 9.0W

 

  • Size 5 ½ X 3 ¼ X 1 ½ less protrusions, weight 10.6 Oz
  • Full CW band coverage of 40 and 20 meters
  • Optimized for operation from 3 series-connected 18650 Lithium cells
  • RIT tunes + and – 5KHz
  • Blue OLED display reads frequency to 10 Hz and RIT offset
  • Built in Iambic keyer is adjustable 5 to 35 WPM with front panel control
  • Separate jacks for straight key and paddles; Always ready for SKCC contacts
  • Operates on 9.5 to 14 volts, < 110ma receive, about 1.1 Amp Xmitt at 10 volts
  • Selectable tuning resolution steps of 10, 100, and 1000Hz
  • Low battery indicator with internal adjustment 9.5 to 11.5 volts 
  • Front panel adjustable RF gain control
  • Front panel TX power control; Adjustable from 0 to full output
  • Rugged TO-220 FET RF amp has delivered 5 Watts key down for 5 minutes
  • Signal quality blue LED, RIT warning orange LED, Low battery red LED
  • More than enough audio to fill any room with an external speaker
  • Excellent receiver sensitivity with MDS of -125dBm
  • Very effective receive AGC prevents ear damage with strong signals
  • Transmitter harmonics and spurs -52dB, meets FCC specs
  • CW sidetone is the actual transmitter signal as heard by receiver
  • Match the received signal tone to the sidetone for perfect zero beating
  • Sharp IF filter; Better than 350 Hz at the -6dB point, plus 700 Hz audio filter
  • Over 200 machine placed SMT parts, and about 55 user installed parts
  • All critical circuits are factory pre-aligned and calibrated
  • No endless “back menus”; There is a control or switch for every function
  • Options include pre-wound toroid coils and complete factory assembly

 

Resources:

TR-25 Reviews:

Write Your Own Review
You're reviewing:TR-25 CW Transceiver Kit (Retired)
Copyright © 2013-present Magento, Inc. All rights reserved.